基于NURBS的叶片全三维气动优化设计

采用NURBS对叶轮机械叶片的关键截面和基迭线进行参数化表达,该表达方法为基于现代优化算法的叶片粘性气动最优化设计提供设计变量,以实现对叶片截面和叶片基迭线弯、倾、扭、掠变形的控制。该方法编写成的叶片全三维控制模块和网格自动生成程序、CFD程序集成到商业软件iSIGHT中,构成了叶片全三维粘性气动优化设计平台。在该平台上选用ASA成功进行了某透平静叶片的全三维粘性气动最优化设计。实验结果表明通过同时改变叶片截面和叶片基迭线的方法能够有效地抑制叶片的二次流损失,因此该设计平台在叶片气动优化设计中有广阔的应用前景。     

使用超声估计肌肉疲劳的初步研究

表面肌电信号把神经肌肉活动和肌肉收缩联系起来，已被视为一种估计肌肉疲劳比较客观的方法，但也存在一些不足。另一方面，超声已广泛应用于医学诊断和研究，在骨骼肌方面也有不少研究报道，但还未见文献报道超声用于肌肉疲劳的估计。本文介绍一套自行开发的新的同步连续采集B超图像、力矩和肌电信号的采集系统，并利用它对肱二头肌的肌肉疲劳进行了估计。试验表明在30秒的肌肉疲劳过程中，肌肉厚度会以非线性的方式增加。     

具无限时滞的周期系统的持久性与正周期解

本文利用比较定理,控制收敛定理和积分平均的方法,讨论一类具有无限时滞的非自治,非卷积的捕食者-食饵系统的一致持久性和正周期解。     

Optimized prefactored compact schemes

The numerical simulation of aeroacoustic phenomena requires high-order accurate numerical schemes with low dispersion and dissipation errors. In this paper we describe a strategy for developing high-order accurate prefactored compact schemes, requiring very small stencil support. These schemes require fewer boundary stencils and offer simpler boundary condition implementation than existing compact schemes. The prefactorization strategy splits the central implicit schemes into forward and backward biased operators. Using Fourier analysis, we show it is possible to select the coefficients of the biased operators such that their dispersion characteristics match those of the original central compact scheme and their numerical wavenumbers have equal and opposite imaginary components. This ensures that when the forward and backward stencils are added, the original central compact scheme is recovered. To extend the resolution characteristic of the schemes, an optimization strategy is employed in which formal order of accuracy is sacrificed in preference to enhanced resolution characteristics across the range of wavenumbers realizable on a given mesh. The resulting optimized schemes yield improved dispersion characteristics compared to the standard sixth- and eighth-order compact schemes making them more suitable for high-resolution numerical simulations in gas dynamics and computational aeroacoustics. The efficiency, accuracy and convergence characteristics of the new optimized prefactored compact schemes are demonstrated by their application to several test problems.     

微球板电子倍增器基体制备技术研究

新型微球板电子倍增器和微通道板相比具有高增益、无离子反馈、制备简单、造价低廉等优点。介绍了微球板电子倍增器的工作原理、特点和广阔的应用前景。由于微球板基体的形成技术是微球板制备的关键技术，论文从理论上研究了微球板基体烧结过程中的烧结速率。并采用自行设计组分的高铅玻璃，用立式炉成珠设备进行了玻璃微珠的制备。探索了微球板制备过程中玻璃微珠的分级技术、微球板电子倍增器基体成型工艺和技术。制备出基本满足要求的微球板电子倍增器基体。给出了制造的样品和文献上样品结构的SEM对比照片，最后对实验过程中的一些现象进行了分析，并给出了实验的结论。     

石灰石闪蒸改性及脱硫性能的试验研究

本文对3种不同产地的石灰石进行了闪蒸改性处理,对改性石灰石颗粒的孔径分布进行了测定,研究了压力、温度等参数对石灰石闪蒸改性的影响。并在气流反应器上对闪蒸后的样品进行了硫化试验。结果表明,在一定的压力和温度下,闪蒸处理能够增大石灰石颗粒的微孔孔径,并使石灰石样品的脱硫性能得到较大提高。     

某些类氖离子和类镍离子等离子体状态对应关系的研究

利用一维拉格朗日流体动力学程序Med103详细研究了产生类镍Ag,Cd,In,Sn, Sb离子和类氖Fe,Co,Ni,Cu,Zn离子的等离子体状态.通过对电子温度、离子丰度、离子数密度等状态参量的分析比较，得到了这两类等离子体状态之间的对应关系.即类镍银的等离子体状态与类氖铁 的相近，类镍镉的与类氖钴的相近，依次类推.利用这一对应关系可以方便地由类氖机理x射线激光的等离子体状态来对相应元素的类镍x射线激光的等离子体状态进行判断. 关键词： 类氖 类镍 等离子体状态 x射线激光     

高电荷态Ar^q＋与Ne碰撞中入射离子电荷交换截面的研究

报道Ar^q Ne(q=8，9，11，12)碰撞体系中多电子转移过程，得到了多组实验测量电荷交换截面数据，讨论入射离子电荷交换截面、反冲离子产生截面与入射离子电荷态、能量以及散射离子电荷态的关系，并且将实验结果与Ar^q Ar碰撞体系进行对比研究。在修正分子库仑过垒模型的基础上，对实验现象做了合理的解释。     

Excitons in coupled quantum dots

Properties of excitons in vertically coupled GaAs/AlGaAs quantum dots were investigated using the variational method within the envelope function and effective mass approximations. It was found that when the thickness of the spacer layer becomes less than about one exciton Bohr radius, both the exciton binding energy and the fundamental optical transition energy are reduced compared to those in isolated quantum dots. This is a result of increased space extension of exciton due to the penetration of carrier wave functions into the spacer layer and corresponding reduction in confinement energy which dominates over the Coulomb interaction between the electron and the hole.     

sl玻色子体系在U(2l+1)O(2l+2)过渡区的严格解

利用无穷维李代数方法得到了相互作用sl玻色子体系在U( 2l+ 1 ) O( 2l+ 2 )过渡区的能谱和波函数的严格解 .给出了该系统Bethe假定方程的数值解法 .